Call us on 01332 864455
SW-12RII
Information
The SW-12RII is the ideal choice where accurate and efficient small diameter machining is critical. This model comes equipped with opposing tool posts for simultaneous machining on the main spindle and an 8 station back working platen which further increases overlapped machining opportunities.
The flexibility of the SW-12RII is further enhanced by its ability to switch between guide bush mode (Swiss type) and non-guide bush mode.
Y2 axis on the sub-spindle platen allows both cross working and front facing power tools to be mounted in any station.
WORKPIECE |
||
|---|---|---|
| DIAMETER |  |
13mm |
| LENGTH |  |
135mm / 30mm |
| GEOMETRY |  |
|
| C AXIS |  |
MAIN + SUB SPINDLE |
Benefits
- Standard machining diameter 13mm
- Z1 Stroke of 135mm in Swiss mode (Guide Bush)
- Rapid axes of up to 35m/min
- Switchable between guide bush and non-guide bush modes
- High speed main and sub-spindles @ 15,000 rpm
- Opposed twin platen for balanced machining on main spindle
- Built-in type main and sub-spindle motors for improved indexing accuracy
- STAR MOTION CONTROL to minimize idle time
- 8 Station sub-spindle platen for maximum overlapping
Specification
| MAIN SPINDLE SIDE | |
|---|---|
| Number of axes | 10 |
| Main spindle (headstock) | Z1 / C1 axis |
| MAIN SPINDLE PLATEN | X1 / Y1 / X3 / Y3 AXIS |
| MAX. MACHINING DIAMETER | 12 MM |
| HEADSTOCK STROKE (SWISS TYPE / NGB MODE) | 135 MM / 30 MM |
| MAIN SPINDLE POWER | 3.7 kW |
| MAIN SPINDLE SPEED | 15,000 rpm |
| MAIN SPINDLE TOOLING | |
| TURNING TOOL | 7 TOOLS @ 10 MM SQ |
| DRILLING ARM SLEEVE HOLDER CAPACITY | 4 x Ø 16 MM SLEEVES (ER16) |
| POWER DRIVEN TOOL (PDT) POSITIONS | 6 TOOLS |
| MAX (PDT) SPEED | 12,000 RPM |
| KINEMATIC DIAGRAM |
|---|
 |
| SUB SPINDLE SIDE | |
|---|---|
| Sub spindle | X2 / Y2 / Z2 / C2 AXIS |
| Max. chucking diameter | 12 MM |
| Drive power | 1.1 kW |
| SUB SPINDLE POWER | 3.7 KW |
| Sub spindle speed | 15,000rpm |
| SUB SPINDLE tooling | |
| BACK-WORKING PLATEN POSITIONS | 8 |
| MAX DRILL SLEEVE CAPACITY | ER16 |
| POWER DRIVEN TOOL (PDT) POSITIONS | 8 (ER16) |
| MAX (PDT) SPEED | 12,000 RPM |
| FMB | BAR FEED DIMENSION A (MM) | ||
|---|---|---|---|
| Micromag 08-20 | 3415 (1.6M) | 5015 (3.2M) | 6015 (4.2M) |
| Minimag 2-20 | 3415 (1.6M) | 5015 (3.2M) | 6015 (4.2M) |
| Turbo 2-20 | 3215 (2.2M) | 4215 (3.2M) | 5215 (4.2M) |
More information
