Call us on 01332 864455

Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages
Menu

BAR FEED GUIDE JAWS

MINIMAG

The MINIMAG 2‐20/3200 steady rest guide jaws should be matched to the diameter of the material. The diameter of the jaws should be 1 ~ 2 mm greater than the bar diameter.

MICROMAG

The MICROMAG 08‐20/3200 steady rest guide jaws should be matched to the diameter of the material. The diameter of the jaws should be 1 ~ 2 mm greater than the bar diameter.

TURBO 2-20 GUIDE JAWS

The TURBO 2‐20/3200 steady rest guide jaws should be matched to the diameter of the material. The diameter of the jaws should be 1 ~ 2 mm greater than the bar diameter.

TURBO 3-36 GUIDE JAWS

The TURBO 3‐36/3200 steady rest rollers should be replaced with guide jaws when profiled bar is used. The diameter of the jaws should be 1 ~ 2 mm greater than the maximum bar diameter.

TURBO 5-65 GUIDE JAWS

The TURBO 5‐65/3200 steady rest rollers should be replaced with guide jaws when profiled bar is used. The diameter of the jaws should be 1 ~ 2 mm greater than the maximum bar diameter.